weight 14.9 C 15.2 mg packaging 2000/7 reel; 7500/13 reel; plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth usb 2.0 common mode choke 0805 document 306-1 document 306-1 revised 01/18/12 eliminates virtually all common mode noise in high-speed, dif - ferential mode signal transmission applications such as usb 2.0, ieee1394, hdmi and lvds. most provide >25 db common mode attenuation and >100 ohms impedance. common mode common mode impedance typ (ohms) attenuation typ (db) inductance 2 dcr max 3 isolation i rms 4 part number 1 10 mhz 100 mhz 500 mhz 10 mhz 100 mhz 500 mhz min (nh) (ohms) (vrms) (ma) 0805usb-421ml_ 14 42 70 1.1 2.3 8.4 23 0.12 250 500 0805usb-901ml_ 28 90 154 1.4 4.2 16.9 47 0.17 250 500 0805usb-172ml_ 57 170 303 2.3 6.7 22.0 84 0.25 250 500 0805usb-262ml_ 85 260 435 3.0 8.6 27.8 147 0.26 250 500 0805usb-372ml_ 118 370 641 4.5 11.9 34.3 189 0.32 250 500 0805usb-502ml_ 148 500 945 4.9 14.5 31.3 273 0.37 250 500 0805usb-672ml_ 246 670 1231 8.4 16.6 30.0 322 0.45 250 500 0805usb-902ml_ 294 900 1715 8.7 18.7 30.5 413 0.65 250 400 1. when ordering, please specify packaging code: 0805usb-902ml c packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plas - tic tape (7500 parts per full reel). 2. inductance measured at 100 mhz using an agilent/hp 4286a impedance analyzer and a coilcraft smd-a fxture. 3. dcr is specifed per winding. 4. current per winding that causes a 20c rise from 25c ambient. 5. operating temperature range ? 40c to 85c. 6. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. 0.065 1,65 max 0.050 1,27 0.004 0,10 0.018 0,46 0.030 0,76 0.040 1,02 0.036 0,91 0.020 0,51 0.020 0,51 0.014 0,36 0.004 0,10 recommended land p attern 0.080 0.004 2,03 0,10 12 43 1 2 4 3 3 4 2 1 designers kit c384 contains 10 each of all 0603usb, 0805usb and 1206usb parts core material ferrite environmental rohs compliant, halogen free terminations gold over nickel over silver-palladium-glass frit. ambient temperature C40c to +85c with i rms current storage temperature component: C40c to +85c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf dimensions are in inches mm us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
usb 2.0 common mode filter 0805 document 306-2 document 306-2 revised 04/03/13 1000 10000 100 10 1 impedance (ohms) frequency (mhz) 11 0 100 1000 10,000 -902 -672 -262 -901 -421 -172 -502 -372 typical impedance vs frequency atten uation (db ) 5 0 10 15 20 25 30 35 40 11 0 100 1000 10,000 frequency (mhz ) -902 -672 -262 -901 -421 -172 -502 -372 typical common mode attenuation (ref: 50 ohms) atten uation (db) 1 0 2 3 4 5 6 7 8 11 0 100 1000 10,000 frequency (mhz ) -902 -672 -262 -901 -421 -172 -502 -372 typical differential mode attenuation (ref: 50 ohms) us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
